Automatic Triaxial System 10KN 30KN 50KN 100KN

Description:

Previous : 38MM 50MM 70MM 100MM Triaxial Test Chamber

Next : Triaxial Load Frame 10kn 30KN 50KN

Product Introduction
Specification

Descriptions:

Standard: ASTM D4767, ASTM D2850, ASTM D2166/D2166M

Fully Automatic Triaxial Testing System Apparatus model is adopting the most advanced technology.

It is integrated the technology of mechanic, electronic, fully-automated control and sensor automated checking.

The range of Triaxial Loading Frame has been designed to be used as part of computer controlled triaxial system or as a stand alone unit.

Consist of Triaxial Loading Frame and Advanced Pressure Volume Controller. Both are built up with the LCD graphical display and panel keypad.

Triaxial Loading Frame with rigid, durable, low noise and smooth running characteristics, adopts the stepper motor coupled with worn gear

drive system to supply the power source. It is equipped with upper and lower limit device; the axial deformation is measured and collected

by high-precision displacement sensor. Axial load is measure by force sensors. With over force protection device, when the axial force loaded

is larger than the measuring range of the sensor, the machine will stops working automatically.

The Advanced Pressure Volume Controllers is very easy to use and an ideal solution for the most modern laboratories.

When used with Triaxial Loading Frame, data loggers and software, they can be controlled from a computer to form part of a

complete automated triaxial testing system. They may also be used as stand alone units which are fully functioning with or

without computer control. All the devices has its own computer interface. The devices come complete with internal volume

and pressure transducers. Both channel are pre-calibrated, it can generate pressures up to 2000kPa (20bar) and provides a maximum volume measurement of 100ml which is readable to 0.001ml.

Model Number		SX-SZY-E-1
Max. Axial Force		10kN (Load Sensor)
Speed Rate		0.000001~6mm/min
Shearing rate		0.000001- 9.99999 mm/min ( additional cost USD400 price difference )
Accuracy		±0.1% F.S
Displacement range		0-50mm
Resolution		0.001mm
Max vertical space		500mm
Horizonal space		260mm
Dia of bearing plate		96mm
Built-in data acquisition		4-channel , 16digt AD
Samples Size		Ø 38mm to Ø 50mm (Ø 38mm triaxial cell as standard packing)
Voltage		220V ± 20V, 50 Hz, 1pH
Frame Size		420×370×850mm
Net gross		50kg
Advanced Pressure Volume Controller The Pressure /volume change controller , with easy operation and a ideal solution method used in modern labs , once worked with load controller , data recorder and English software system , form a complete automatic trixial testing system by PC controlled, also as a separate standard parts , whatever PC or not , can work properly and separately , each model has PC communication port , the device is equipped with built-in volume and pressure cells , which is pre-calibrated when leaving factory , and up to Max pressure of 3Mpa and Max of volume change of 60ml , resolution with 0.001ml
Main specification for Advanced Pressure Volume Controller
Precision	±0.1% F.S.
Confining Pressure	Measuring Range : 0 ~ 2 MPa Resolution : 1 kPa Accuracy : ±1kPa
Back Pressure	Measuring Range : 0 ~ 2 MPa Resolution : 1kPa Accuracy : ± 1kPa
Pore Pressure	Measuring Range : 0 ~ 2 MPa Resolution : 1kPa Accuracy : ±0.1% F.S.
Displacement	Volume Range : 0 ~ 100ml Resolution : 0.001 ml Precision : ± 0.01 ml
Volumetric	Volume Range : 0 ~ 60ml Resolution : 0.001 ml Precision : ± 0.01 ml

Test Module
Date Accuisition Module; Back Pressure Saturation Test; Consolidation in same direction & different direction (pre contact) test; Unconsolidation - undrained test (U-U test); Consolidation - undrained test (C-U test); Consolidation - drainage test (C-D test);

Dimension	Triaxial Loading Frame 10kN : Size : 42×37×85cm Weight :52kg Pressure Volume Controller : Size : 75cm(L) x 20cm(W) x 28cm(H) Weight : 15kg
Power	110V / 220V ± 20V, 50/60 Hz, 1pH